For plating and coating shops
Surface area and parts per load, before you quote the finish.
Feevion Parts reads the customer’s model and gives the true surface area, holes and pockets included, and how many parts fit a tank, rack or barrel. Price by area, per part, by weight or per load, with racking, masking, lot fees and minimums, the way your shop really charges.
- Total surface area from STEP, IGES, STL, OBJ or 3MF: both sides, edges, and the walls of every hole and pocket
- Your tanks, racks, barrels and ovens: parts per load worked out from their size or weight limit
- Finishes charged by area (ft² or m²), per part, by weight or per load at the line’s hourly rate
- Racking, masking and inspection per part; a lot fee per order; a minimum charge per finish
- Several finishes on one part, such as strip, plate and bake
- A part library for repeat work, with certificates and every price you quoted
- Quotes the customer accepts online, with revisions kept when you change one
Sound familiar?
Area by guesswork
Working out square feet from a print misses the bores, pockets and edges, and that is where the margin goes.
Loads are a feel
How many parts go in a tank or barrel decides the price per part, but it is usually a rule of thumb.
Small lots lose money
Without lot fees and minimums built into the quote, the five-piece order costs more to run than it brings in.
How it works
- Upload the customer’s file. Their STEP or other model gives the exact area; a drawing works too, with the sizes typed in.
- Pick the finish and line. Your finishes and tanks are set up once. Feevion fills the load and prices the order.
- Quote and get the yes. Send the quote from Feevion; the customer accepts online and you are told.
Questions
Does the area include holes and inside walls?
Yes. It is the area of every face of the solid model: outside, inside, edges, and the walls of every hole, pocket and thread relief that is modelled.
How does it work out parts per load?
For a tank, rack or oven it fits the parts by size in rows, with the clearance and gap you set, up to the weight limit. For a barrel only the weight counts. You can always type your own number.
We charge differently for every customer.
Each estimate keeps its own rates, copied from your settings when it is made, so changing one quote never changes another.